1. Buy A Compatible SDR USB Dongle (Based On The Realtek RTL2832U)
   [Compatible Tuners: E4000, R820T, R820T2, R828D, FC0013, FC0012, FC2580, ...]
   See Compatible Tuners/Dongles: https://osmocom.org/projects/rtl-sdr/wiki/Rtl-sdr


2. Open A Shell And Install SDR Tools (Here Only "rtlsdr", "gqrx" And "cubicsdr") With This Commands :
   
   #> apt-get update
   #> apt-get install rtl-sdr librtlsdr-dev gqrx-sdr cubicsdr


3. Blacklist Module(s) :
   - Edit The "/etc/modprobe.d/blacklist.conf" File (Here With "Vim" But You Can Use Any Editor) :
   
   #> vim /etc/modprobe.d/blacklist.conf
   - Add At The End Of File This Lines (You Can Add Others If You Want) :
   
   blacklist rtl8xxxu
   blacklist dvb_usb_rtl28xxu
   blacklist dvb_usb_v2
   blacklist rtl_2830
   blacklist rtl_2832
   blacklist r820t
   - Save And Close "/etc/modprobe.d/blacklist.conf" File
   - Reboot PC


4. After Reboot, (If Unplugged) Plug Your SDR USB Dongle
   To Watch Your SDR USB Dongle, enter command :
   
   #> lsusb | grep -i rtl
   [ OR ]
   
   #> dmesg
   [ OR ]
   
   #> dmesg | grep -i rtl


5. And Just Start "gqrx" (From A Shell Or Menu)
   [If You Want Reset "gqrx" Configuration, Run This Command On A Shell "gqrx -r"]


6. If You Prefer, Instead Of "gqrx", You Can Also Start "cubicsdr"...


7. For More..., Install GNURadio:
   
   #> apt-get install gnuradio gnuradio-dev

Based on available search results, the "" identifier refers to a widely marketed, portable 1080P/4K-compatible smart projector, often branded as ,

, or similar "No-Name" Chinese brands in the $100–$200 range. It is frequently categorized as an "indoor/outdoor" smart projector, often featuring Android 11, WiFi 6, and a 180° rotatable stand. Key Performance Characteristics (Based on Typical Specs) Native 1080P (1920x1080) with 4K support.

I can tell you if this is worth the money for your specific situation.

Typically advertised around 600–800 ANSI Lumens, though "white brightness" or "lux" numbers are often inflated in generic listings. Operating System: Android 11 (smart functionality).

A "proper" review of this type of projector emphasizes that it is a best suited for casual viewing, camping, or kids' rooms rather than a primary home theater.

1249mp4 -

Based on available search results, the "" identifier refers to a widely marketed, portable 1080P/4K-compatible smart projector, often branded as ,

, or similar "No-Name" Chinese brands in the $100–$200 range. It is frequently categorized as an "indoor/outdoor" smart projector, often featuring Android 11, WiFi 6, and a 180° rotatable stand. Key Performance Characteristics (Based on Typical Specs) Native 1080P (1920x1080) with 4K support.

I can tell you if this is worth the money for your specific situation.

Typically advertised around 600–800 ANSI Lumens, though "white brightness" or "lux" numbers are often inflated in generic listings. Operating System: Android 11 (smart functionality).

A "proper" review of this type of projector emphasizes that it is a best suited for casual viewing, camping, or kids' rooms rather than a primary home theater.

1. (If Unplugged) Plug Your SDR USB Dongle


2. (If Not Installed), Install Packages:
   [ "rtl-sdr" For "rtl_fm" command, "sox" For "play" command, "alsa-utils" For "aplay" command ]
   
   #> apt-get install rtl-sdr sox alsa-utils


3. Method 1: Run Command (Output Audio With "play"):
   [ Replace "-f 99.6M" By A FM Radio Frequency, And "-p 51" By Your PPM Correction ]
   
   #> rtl_fm -f 99.6M -M wbfm -s 200000 -r 44100 -p 51 | play -t raw -r 44100 -es -b 16 -c 1 -V1 -


4. Method 2: Run Command (Output Audio With "aplay"):
   [ Replace "-f 99.6M" By A FM Radio Frequency, And "-p 51" By Your PPM Correction ]
   
   #> rtl_fm -f 99.6M -M wbfm -s 200000 -r 44100 -p 51 | aplay -r 44100 -f S16_LE -t raw -c 1