If your receiver won't boot past the "LOAD" screen, use the method: Rename your firmware file to rom.bin . Insert the USB into the powered-off receiver.
Locate your file (e.g., Hawks_555_mix_2507.bin ) on the drive. Press to start the process. A progress bar will appear. Wait for it to reach 100% . If your receiver won't boot past the "LOAD"
Copy the file directly to the root directory of your USB drive (not inside a folder). Plug the USB drive into the receiver’s USB port. Press Menu on your remote. Navigate to Settings or System Upgrade . Select USB Upgrade . Execute the Update Press to start the process
) using a .bin firmware file. This process is commonly used to refresh software, fix "LOAD" errors, or update channel lists. Copy the file directly to the root directory
The receiver will typically reboot automatically once finished.