Kk2.jpg Guide

: Always remove your propellers before connecting a battery for the first time or performing calibrations to avoid accidental injury. 2. Initial Configuration

: Place the flight controller (FC) on your frame with the LCD facing the front of the craft and the buttons toward the back. kk2.jpg

: Connect your Electronic Speed Controllers (ESCs) to the right side of the board. Ensure you use the correct motor layout for your frame type (e.g., Quadcopter X or +). : Always remove your propellers before connecting a

: Power up your transmitter (TX) and FC. Navigate to the "Receiver Test" menu on the LCD. Move your TX sticks and verify the values change correctly (e.g., pushing the stick left should show "Rudder Left"). If they move the wrong way, use your TX's "Reverse" setting. : Connect your Electronic Speed Controllers (ESCs) to

: Use the on-board "PI Editor" to adjust the gain settings if your drone feels shaky or sluggish. Beginners can often start with the default firmware settings provided by DroneTrest. KK2.1 Flight Controller Guide - Guides