Mitel-5320e-ip-phone-stuck-on-dhcp-discovery -

: Mitel systems often require specific DHCP Options (like Option 43 or 125) to tell the phone where the MiVoice Business controller is located. If these aren't set correctly in your DHCP server, the phone may loop during discovery.

When a Mitel 5320e IP phone Go to product viewer dialog for this item. mitel-5320e-ip-phone-stuck-on-dhcp-discovery

is stuck on "DHCP Discovery," it means the device is powered on but cannot obtain an IP address from your network's DHCP server . This is a common hurdle during setup or after network changes. Core Troubleshooting Steps : Mitel systems often require specific DHCP Options

Navigate to and disable DHCP to enter a static IP, Subnet Mask, and Gateway. is stuck on "DHCP Discovery," it means the

: Ensure the Ethernet cable is securely plugged into the LAN port (not the PC port) on the back of the phone and connected to a live network switch.

: Confirm that your router or server has an active DHCP pool with available addresses. If the pool is full, the phone will wait indefinitely.

Hold the (or the volume keys) while booting the phone to enter the configuration menu.