Sakz — Mk 2 Shema Podkljuchenija

Test the system monthly by using the "Test" button on the sensors to ensure the valve closes correctly.

Knowing the exact valve model you are using will help me provide a more detailed pinout for your specific wiring.

The SAKZ-MK-2 typically uses connectors for fast, "plug-and-play" installation. Follow these steps for a standard setup: Valve Connection: sakz mk 2 shema podkljuchenija

The valve is usually normally open and requires a manual reset after a trip. Sensor Interconnection:

Install at breathing height, roughly 1.5–1.8m from the floor. Test the system monthly by using the "Test"

If using a remote panel, connect it to the BSU or the last sensor in the chain to receive status signals. Plug the BSU into a standard 220V outlet .

Connect the impulse valve to the unit using the dedicated "Valve" (Клапан) port. Follow these steps for a standard setup: Valve

Connect the (methane) and SZ-2 (carbon monoxide) sensors to the BSU.